Filter
Top Products
ENGLISH
64
OPERATION USING EXTERNAL DEVICES
-----------------------------
... with an analogue TV signal
7
Suitable devices: Digital satellite receiver,
DVD player/recorder, set-top box, camera
recorder.
7
Video signal: CVBS.
7
Audio signal: stereo, analogue.
7
»AV2« preset.
1 Connect the »Video« socket on the
television to the corresponding socket of the
external device with an RCA cable (video
signal).
2 Connect the »L R« sockets on the television
to the corresponding sockets of the external
device with RCA cables (audio signal).
Note:
7
There must not be a video signal at the »AV2«
and »AV1/S-VHS« socket at the same time.
This could lead to picture disturbances.
Using a DVD player,
DVD recorder, video recorder
or set-top box
1 Switch on the external device and select the
function you wish to use.
2
Press
» «
, use »
V
«, »
Λ
«, »
<
« or »
>
« to
select the preset for the input signal (»AV1«,
»AV2«, »S-VHS«, »HDMI1«, »HDMI2«,
»HDMI3«, »HDMI4« or »Component«)
and press
»OK«
to confirm.
Headphones
Connecting the headphones
1 Plug the headphone jack (3.5 mm ø jack
plug) into the headphone socket on the tel-
evision.
Changing the headphone volume
1 Open the menu with »MENU«.
2 Select the menu item »SOUND SETTINGS«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
– The »SOUND SETTINGS« menu appears.
4 Select the line »Headphone« with »
V
« or
»
Λ
«.
5 Set the preferred volume with »
<
« and »
>
«.
6 Press »MENU« to end the setting.
Note:
7
Prolonged listening with headphones at loud
volumes can damage your hearing.
Hi-fi System
Connecting digital multi-channel
amplifier/AV receiver
With this connection, you can playback the
audio signal of the television channel via the
HDMI cable sur the multi-channel amplifier or
the AV receiver.
1 Connect the »HDMI2 (ARC)« (HDMI 1.4
Audio Return Channel) socket to the relevant
socket on the HDMI ARC compliant Digital
multichannel amplifier / AV receiver with a
standard HDMI cable (digital audio signal);
or
2 Connect the »Optic Out« socket on the
television to the corresponding socket on the
AV receiver using a standard optic digital
cable (digital audio signal).
Important:
7
Do not use a HDMI cable longer than 5 m
for HDMI ARC connection.
Apply the device with HDMI ARC
function and activate HDMI ARC
1 Switch on the the multi-channel amplifier
or the AV receiver. If a Blu-ray Player is
connected on the AV receiver, the player
must be switched on, too.
2 Open the Tools menu with »TOOLS«
button.