Filter
Top Products
26
Note:
Do not connect any other equipment while the device is switched on.
Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the
external devices and the antenna.
Decoder or satellite receiver
In order for the television to receive encoded programs from a
privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
1 Connect the »AV1« socket on the television set and the appro-
priate socket on the decoder using a EURO-AV cable.
Notes:
A satellite receiver can also be connected to this socket.
If you want to use both a satellite receiver and a decoder, the
decoder must be connected to the satellite receiver.
Using a decoder
1 Switch on the television and the decoder.
2 Select the »AV1« preset channel by pressing »AV« repeatedly
until »AV1« appears on the screen.
Headphones
Connecting headphones
1 Insert the headphone jack (3.5 mm ø jack plug) in the head-
phone socket on the television.
Selecting the sound settings for the headphones
1 Press »i« to open the »MAIN MENU«.
2 Select »Sound« with »P+« or »P-« and confirm with »OK«
3 Select »Headphone« with »P+« or »P-« and confirm with
»OK«.
4 Select »Volume«, »Balance«, »Bass«, »Treble« or »Sound Type«
with »P+« or »P-« and set with »
Ǹ
« or »
Ƿ
«.
5 Press »
i« to finish the setting.
USING EXTERNAL DEVICES
_______________
S
-
V
ID
E
O
AUDIO IN
R
L
V
ID
EO
IN
AV 1 AV 2
AV 3
L
R
AUDIO
OUT
PAY-TV
Decoder
Headphone
Volume
Balance
Bass
Treble
Sound Type Stereo
●
F
Back
●
i
Exit