Filter
Top Products
ENGLISH
15
CONNECTION AND PREPARATION_______
Connection diagram for the loudspeakers
Setting up the loudspeakers
If possible, set up the front loudspeakers in line with the TV set, angled slightly
towards the listener. The listener and the speakers should form an equilateral
triangle. You thus achieve the best stereo effect.
To achieve an optimal bass sound, we recommend that you set up the subwoofer
to the left or right of the front loudspeakers, in such a way that the sound crosses
the room diagonally.
When you are in the centre of the room, you may not be able to pick up
the bass tone of the subwoofer sufficiently. This is caused by what are called
standing waves, which occur between parallel walls. In this case, it is sufficient
to position the subwoofer facing the wall at an angle, or to switch the phase
switch »PHASE 0° 180°« on the subwoofer.
Avoid placing the loudspeakers in a corner, because this over-amplifies the bass
tones.
Objects in front of the loudspeakers significantly impair the treble tones and the
stereo effect.
230 V~ 50/60 Hz
max. 70W
EURO AV TV
SPEAKERS
AUDIO OUT
L
R
COAXIAL OUT VIDEO OUT
SUBWOOFER
Y Pb/Cb Pr/Cr
FM ANT
AM ANT
IMPEDANCE
8 Ω
LR
S VIDEO
INPUTINPUT
PHASE0° 180°
ON/OFF
I
0
230 V~ 50/60 Hz
max. 75 W
SUBWOOFER IN
Subwoofer
Front left
Front right