Filter
Top Products
ENGLISH
23
SETTINGS
____________________________________________________________________________________
2 Select »AUDIO OUT« with »Ń« or »
Ľ
«.
3 Use »
ı
« to move to the right column.
– »ANALOG«: the coaxial output is deactivated. »ANALOG« is the default
setting.
– »SPDIF/RAW«: the coaxial output provides the original signal format.
– »SPDIF/PCM«: the coaxial output changes into the PCM format for
digital recording devices.
4 Select the required setting by pressing »Ń« or »
Ľ
« and confirm with
»DEMO/OK«.
Multiple channel settings
You can switch the channel playback to Dolby Digital mode if a 1+1 audio code
is available i.e. the Dolby Digital signal only contains a stereo signal.
1 Select »AUDIO SETUP« with »Ń« or »
Ľ
« and confirm with
»DEMO/OK«.
2 Select »DUAL MONO« with »Ń« or »
Ľ
«.
3 Use »
ı
« to move to the right column.
– »STEREO«: 1:1 stereo playback, CH1 for the left channel, CH2 for the
right channel. »STEREO« is the default value.
– »L-MONO«: CH1 mono playback, CH1 on left and right channel.
– »R-MONO«: CH2 mono playback, CH2 on left and right channel.
– »MIX-MONO«: mixed mono playback, CH1 and CH2 on left and right
channel.
4 Select the required setting by pressing »Ń« or »
Ľ
« and confirm with
»DEMO/OK«.
Setting the dynamic range
DTS (AC3) soundtracks have a very large dynamic volume range, hence there is
an extreme relationship between quiet and loud tones. If the full playback
volume is too loud, simply reducing it does not give a satisfactory result, since
dialogue can hardly be heard. You can turn down the louder sounds and
turn up the quieter passages, while retaining the volume of the dialogue. This
function is called the dynamic range.
1 Select »AUDIO SETUP« with »Ń« or »
Ľ
« and confirm with
»DEMO/OK«.
2 Select »DYNAMIC« with »Ń« or »
Ľ
«.
3 Use »
ı
« to move to the right column.
– »OFF«, »2/8« ... »6/8«, »FULL«. »OFF« (default setting) means uncom-
pressed dynamics (for example, during the day), »FULL« means com-
pressed dynamics (for example, late at night).
4 Select the required setting by pressing »Ń« or »
Ľ
« and confirm with
»DEMO/OK«.
- - AUDIOSETUP - -
AUDIO OUT
DUAL MONO
DYNAMIC
PRO LOGIC
PRO LOGIC II MODE
PRO LOGIC II CNTL
MAIN PAGE
ANALOG OUTPUT
ANALOG
SPDIF/RAW
SPDIF/PCM
s
- - AUDIOSETUP --
AUDIO OUT
DUAL MONO
DYNAMIC
PRO LOGIC
PRO LOGIC II MODE
MAIN PAGE
SET STEREO MODE
STEREO
L-MONO
R-MONO
MIX-MONO
s
PRO LOGIC II CNTL
\
\
- - AUDIOSETUP - -
AUDIO OUT
DUAL MONO
DYNAMIC
PRO LOGIC
PRO LOGIC II MODE
MAIN PAGE
DYNAMIC RNG COMPRESSION 6/8
s
PRO LOGIC II CNTL
– – FULL
––
– – 6/8
––
– – 4/8
––
– – 2/8
––
– – OFF
\