Filter
Top Products
36
DISC-MODE
_________________________________________________________________________________
Creating a track memory – playing back tracks in
selected order
You can store and then play back up to 99 tracks in a particular order from the
inserted disc. A track may be stored more than once. The DVD Micro System
must be in the stop position.
This function is not available for DVDs.
1 Select this function with »PROGRAM« on the remote control.
– Display on the DVD Micro System: »P01 T00« and »PROG«. »00«
flashes.
2 Select the desired two-digit track number with the numerical buttons
»1 ... 0« (e.g. »06« or »12«) and confirm with »DEMO/OK«.
– Display: e.g. »P01« (memory position) and »03« (for the first track).
Note:
To programme further tracks, repeat step 2.
3 To start playback of the memory, press »PLAY/PAUSE
ı
II«.
– Playback begins with the first programmed track.
4 To end playback of the memory press »STOP
7
«.
– This memory is stored.
Deleting a program
The memory is deleted if:
– When the system is stopped »PROGRAM« is held down (on-screen
display »PROGRAM OFF«);
– The disc compartment is opened
– The DVD Micro System is switched to standby with »ON/OFF«.
PROG
P01 T00
PROG
P02 T03