Filter
Top Products
Owner s Manual 11
How to connect
Connect the audio and video cables from the external
equipment's output jacks to the TV`s AV IN input jacks, as shown in
the figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source by using the INPUT button on
the remote control.
2. Operate the corresponding external equipment. Refer to
external equipment operating guide.
How to connect
1. Connect the DVD video outputs (Y, Pb, Pr) to the COMPONENT
(Y, Pb, Pr) IN jacks on the and connect the DVD
audio outputs to the AUDIO INPUT jacks on the , as
shown in the figure.
2. If your DVD only has an S-Video output jack, connect this to the
S-VIDEO input on the and connect the DVD audio
outputs to the AUDIO INPUT jacks on the , as shown
in the figure.
NOTE: If your DVD player does not have component video output,
use S-Video .
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the INPUT button on the remote control
to select YPbPr/YCbCr . (If connected to S-VIDEO,
select the AV1/S-VIDEO external input source.)
3. Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component
input ports as shown below.
TV
TV
TV
or composite(AV)
Video output ports
on DVD player
Component ports
on the TV