Filter
Top Products
Adjustment Setup
Adjustment Setup
When VGA DVI input mode is set
VGA/DVI:
Display Mode Full Screen
Adjust
RGB
Reset
Auto Sync.
Color Temper. Standard
Black Stretch On
B
C
A
1. Press MENU button on the remote controller and then use the
VOL+/- to select the ADJ.menu.
2.
3. Press the VOL+ button and then use CH+/- button for desired
adjust parameter option.
4. Press VOL+/-for desired adjust parameter option until a satisfactory
value is achieved. When VGA signals are received, the automatic
mode is used for parameter adjustment.
Note:
Adjust, RGB and Reset are functional only under VGA and DVI mode, and Auto Sync is functional only in VGA mode.
Adjustment Setup
Press CH+/- to enter MENU of picture position setup MENU
H Size
H Position
V Size
V Position
Phase Adjust
B
C
A
Red
Green
Blue
B
C
A
0
0
0
0
0
0
0
0
Not selectable
22 Plasma TV
In VGA and DVI input mode , H Position and V Position can be used to
adjust the picture position.
Display Mode
Adjust
RGB
Reset
Auto sync
parameters in VGA mode. (Not available in DVI)
( After the operation, Complete will be on the right of the option.)
Color temperature
This will increase or decrease Warm (red) and Cold (blue) colors to suit
personal preferences.
Select Cold to give the white colors a blue tint, Standard to give the white
colors a neutral tint, Warm to give the white colors a red tint.
This will adjust the picture aspect ratio.
Under the VGA signal, there are Full Screen , one to one and 4:3
modes for selction under Display mode.
Under the AV1or S-Video signal, there are Full Screen, Vertical Zoom,
Half Zoom, Panorama and 4:3 Modes to select for Display Mode.
Under the DVI signal, there are Full Screen and 4:3 Modes
to select for Display Mode .
This is used for adjusting H Position and V Position as well as
relative parameters in VGA and DVI modes.(Phase Adjust is not
available in DVI)
This is used for the adjustment of the numerical value of red, green and
blue in VGA/DVI mode.
This is used to reset the defecult setting parameters (After the operation,
Complete will be on the right of the option)
This is used for adjustment of picture location frequency and phase