Haier PH-4210D Flat Panel Television User Manual


 
Lock Setup
Lock Set
PassWord
Tuning Lock Off
Preset CH Off
CH Num 1
Source Lock
Child Lock Off
Max Volume 100
UnLock
Change Password
Note:
The initial password is 0000, and the security default password is 9443. If Unlock is activated, the password
setup cannot be changed.
Lock Menu Options
Lock Menu Options
- The TV has the function of security default lock. Password needs to be entered when the program lock mode is to be set.
Press CH+/- to select Tuning Lock and VOL+/- to set it as On/Off. (To set as On, some operation such as search will be
no available. When to enter the SYS. menu, the "Tuner Lock" will appear on the screen). If you want to operate SYS. menu,
you need to enter the Lock menu to set Tuning Lock as Off or operate UnLock item.
Tuning Lock
Preset CH
Preset CH is used for setting up start signal source. Press CH+/- button to select Preset CH. Press VOL+/-
button, sources can be swapped in TV/AV1/SVideo/YPbPr/VGA/DVI/Off mode. After setup, the selected source will be
displayed when the TV is turned on again.
Owner s Manual 27
Press LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the LOCK menu
will be displayed. If the password is not correctly entered, you will be required to reenter the password and the cursor will
remain onscreen.
Press EXIT to exit the window. If the preset OSD time is exceeded, the menu will disappear automatically.
To change the default password: Press CH+/- button and select
Password. Press VOL+/- or ENTER button, the screen will display
Old Pw.----, which will remain on the screen if a wrong password
is entered. If correct password is entered, the screen will
display New Pw.----. Enter the new password, and the screen will display
Confirm----. If the same password is entered correctly twice, the old
password will be changed. If the same password is not correctly entered
twice, the screen will display New Pw.----, and you will be required to start over.