Filter
Top Products
Sound adjustment
Sound Adjust
1. Press MENU button and then use VOL+/- button to select the SOU.menu.
2. Press CH+/- button for desired option.
3. After your option is selected, press VOL+/- button to adjust.
Repeat step 2 and 3 until desired sound has been achieved.
If there is no selction made during the standard display time , the MENU will
disappear. If the MENU or EXIT button is pressed , MENU display will disappear
in sequence or immediately.
4.
Volume 50
Balance 0
SOU.Mode Personal
Treble 50
Bass 70
Surround Off
AVC Off
Woofer Off
B
C
A
Note:
1 . Select Balance to balance right and left sound channels of the TV. The intermediate value is 0. When the indication value of
Balance increases toward+50, sound of the right speaker is stronger and the left speaker becomes weaker. When the indication
value of Balance decreases toward -50, sound out of the right speaker is weaker and left speaker becomes stronger.
2.When Personal mode is not selected, the Personal mode will be entered automatically if Treble or Bass parameters are adjusted.
Sound adjustment
Owner s Manual 21
Sound can be adjusted for any input as follows:
Volume
This will adjust the sound output level.
Balance
This will adjust the output of the right and left speakers to obtain the best
stereo reproduction for your listening position.
SOU. Mode
This select the modes for sound reproduction dependent on the broadcast signals or signals from external inputs received.
Press CH+/- button to Select SOU.Mode,
press VOL+/- button to select the Music Standard Theater or Personal.
Treble
This will adjust the treble output level.
Bass
This will adjust the bass output level.
Surround
The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality
from the TV`s speakers.
Press CH+/- button to Select Surround,
press VOL+/- button to set Surround as Off or On
AVC (Automatic Volume Control)
Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically adjust the volume of the desired channel and reduces the volume
differences between channels and programs, providing a more constant overall level.
This will also reduce the dynamics of sound.
Press CH+/- button to Select AVC,
press VOL+/- button to set AVC as Off or On
Woofer
Woofer is a speaker that complements front speaker`s reproduction capability of low-pitched sound.
Press CH+/- button to Select Woofer,
press VOL+/- button to set Woofer as Off or On