Filter
Top Products
11
598-1214-03
3.
Adjust Range Control. To increase sensitivity,
turn the RANGE control toward MAX. To de-
crease sensitivity, turn the RANGE control toward
MIN. Note: If the RANGE is set too high, false
triggering may result in some environments.
Note: When using test mode to check operation
in the day time:
A. Set the DETECT control switch to DAY/
NIGHT (see Figure 4) and
B. Set the ON-TIME control to TEST (see
Figure 6).
Figure 8 - Coverage Area
Maximum Range Maximum
Coverage Angle
70 ft.
(21 m)
8 ft.
(2.4 m)
180°
Figure 7 - Adjusting Motion Sensor Coverage
Aim Sensor Down
for Short Coverage
Aim Sensor Higher
for Long Coverage