Heath Zenith 598-1214-03 Universal Remote User Manual


 
12
598-1214-03
4.
Set ON-TIME Control. Determine the amount of
time you want the connected device to stay on
after motion is detected (1 or 5 minutes). Slide the
ON-TIME control to the corresponding setting.
IMPORTANT: Avoid Aiming Control At:
Objects that change temperature rapidly, such as
heating vents and air conditioners. These heat
sources could cause false triggering.
Areas where pets or traffic may trigger the control.
Nearby large, light colored objects reflecting
light may trigger the shut-off feature. Do not
point other lights at the sensor.
Figure 9 - Motion Sensor Sensitivity
The detector is most sensitive to motion across its
field of view.
Least Sensitive Most Sensitive
Sensor
Motion
Motion
Sensor