HP (Hewlett-Packard) PL4200N Flat Panel Television User Manual


 
2 HP Pavilion Plasma HDTV User’s Guide
Do not do anything that might damage
the power cable. When disconnecting the
power cable, hold the plug, not the
cable.
Do not make any modifications to, place heavy
objects on, place near hot objects, heat, bend,
twist, or forcefully pull the power cable. Doing so
may cause damage to the power cable which can
cause fire or electric shock. If damage to the cable
is suspected, have it repaired at an Authorized
Service Center.
If the Plasma TV will not be used for a
long period of time, unplug the power
cord from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or
no sound), or if smoke or an abnormal
odor is detected from the Plasma TV,
unplug the power cord immediately.
Continued use of the TV under these conditions
might cause fire or permanent damage to the unit.
Have the TV evaluated at an Authorized Service
Center. Service to the TV by any unauthorized
personnel is strongly discouraged due to its high
voltage dangerous nature.
If water or foreign objects get inside the
Plasma TV, if the Plasma TV is dropped,
or if the cabinet becomes damaged,
disconnect the power cord plug
immediately.
A short may occur, which could cause fire.
Contact an Authorized Service Center for any
repairs that need to be made.
When using the Plasma TV
Do not bring your hands, face, or objects
close to the ventilation holes of the
Plasma TV.
The top of the Plasma TV is usually very hot due to
the high temperature of exhaust air being released
through the ventilation holes. Burns or personal
injuries can happen if any body parts are brought
too close. Placing any object near the top of the
TV could also result in heat damage to the object
as well as to the TV if its ventilation holes are
blocked.
Be sure to disconnect all cables before
moving the Plasma TV.
Moving the TV with its cables attached might
damage the cables which, in turn, can cause fire
or electric shock.
Disconnect the power plug from the wall
outlet as a safety precaution before
carrying out any cleaning.
Electric shocks can result if this is not done.
Clean the power cable regularly to
prevent it from becoming dusty.
Built-up dust on the power cord plug can increase
humidity which might damage the insulation and
cause fire. Unplug the cord from the wall outlet
and clean it with a dry cloth.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared
communication equipment.
Install your infrared sensor in a place
away from direct or reflected light from
your Plasma TV.
mb5pohtv.book Page 2 Wednesday, July 6, 2005 9:52 AM