HP (Hewlett-Packard) PL4200N Flat Panel Television User Manual


 
Attaching the Pedestal
Attaching the Pedestal 5
Attaching the Pedestal
Assembling and Setting
Up the TV
Points to note during installation:
Select a location for the TV that has easy access to
the AC power receptacle.
Provide adequate ventilation so that the
temperature around the television does not rise
above 40° C (104° F). If there is insufficient
movement of air inside the display, heat may build
up inside the television and fire may result. For
ventilation spacing specifics, refer to the
information listed under “Setup” on page 1.
Due to the size and weight of the display and the
pedestal, it is recommended that a minimum of
two people assemble and move the TV.
Accessories for pedestal assembly
A: Pole (2)
B: Short screw (4)
C: Long screw (4)
D: Pedestal (1)
Assembling the pedestal
Match each pole (A) to the mark (a circle or a triangle)
on the pedestal (D). When facing the front of the
pedestal, the right mark is a triangle and the left mark
is a circle. Insert two short screws (B) for each pole.
A
C
B
D
“ “
“O”
mb5pohtv.book Page 5 Wednesday, July 6, 2005 9:52 AM