HP (Hewlett-Packard) md5020n Flat Panel Television User Manual


 
Setting Up the TV26
Audio: Stereo Sound System
If you have a stereo sound system, you can play the TV sound through the sound system. You can connect
the stereo system as shown in the following illustration.
NOTE:
Observe the color coding on connectors.
You can disable the TV speakers and listen to only the stereo speakers.
The volume buttons on the TV remote control normally adjust the volume of the TV stereo output.
This means you do not have to adjust the volume on the stereo system.
If you program the remote control to operate the audio device, the remote control adjusts the
volume of only the audio device and stops adjusting the volume of the TV output. However, the
volume buttons on the TV always adjust the TV output.
To do this... Do this...
Program the remote control to operate the sound system See “Programming for Other Devices” on page 36.
Use the remote control to operate the sound system Press Device to select AUDIO.
Change the volume Press the volume buttons on the TV remote control or on
the stereo system.
Disable the TV speakers Press Settings and go to Sound > Advanced sound >
Internal speakers.