HP (Hewlett-Packard) md5020n Flat Panel Television User Manual


 
Turning the TV On and Off 31
Turning the TV On and Off
Plugging In the Power Cord
1. Connect one end of the power cord to the back of the TV.
2. Connect the other end to a grounded electrical circuit.
Turning On the TV
Press the power button on the side of the TV.
or
On the remote control, press Device until TV is selected, and then press the power button.
The TV might take a minute or so to warm up and display a bright picture. The blue power light blinks during
warm up.
NOTE: It is normal for parts of the TV and the air coming out of the vents to be very warm. If the TV starts
to overheat, the red temperature warning light will turn on and the TV will shut down.