HP (Hewlett-Packard) PL4270N Flat Panel Television User Manual


 
14 HP HDTV User’s Guide
Connecting a digital high-definition DVD
player or other equipment by using an
HDMI cable
This is the recommended connection for HD video and
audio. The HDMI cable is sold separately.
1 Connect an HDMI cable to any of the HDMI
connectors on the rear of the TV: HDMI 1,
HDMI 2, or HDMI 3 (select models only). (There
are no separate audio inputs for HDMI.)
2 Connect the cable to the DVD player or source
equipment.
3 Turn on the DVD player, and start play.
4 Connect power to the TV; see “Connecting power
to the TV” on page 18.
5 Turn on the TV; see “Turning the TV On and Off”
on page 19.
6 Select the input source to view, as well as the
Picture mode, Aspect, and other options; see
“Operating the TV” on page 21.
Connecting a digital, high-definition DVD
player or other equipment by using a
DVI cable
The DVI-D cable, DVI-to-HDMI converter, and the audio
cable are sold separately.
1 Connect a DVI-D cable and DVI-to-HDMI converter
to HDMI 1 on the rear of the TV, and left-right
audio cables to HDMI Audio In L and R.
2 Connect the DVI cable to the DVI-D connector on
the DVD player.
3 Connect the audio cable to the audio out
connectors on the DVD player.
4 Turn on the DVD player, and start play.
5 Connect power to the TV; see “Connecting power
to the TV” on page 18.
6 Turn on the TV; see “Turning the TV On and Off”
on page 19.
7 Select the input source to view, as well as the
Picture mode, Aspect, and other options; see
“Operating the TV” on page 21.
c
CAUTION: Unplug power for the TV and all
connected components before connecting
optional equipment. Ensure that the
optional equipment is powered off.
L
HDMI 1
R
HDMI Audio In
OUT
DVI
AUDIO
DVI
HDMI
DVI
HDMI