Filter
Top Products
FIRST TIME USE - 13 -
input and the components R-Y output to the TV's CR input.
It may be necessary to adjust TINT or turn Auto COLOR-ON to obtain optimum picture quality when using the Y-CB-CR
inputs. (See pages 47 and 48.)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-CB-CR jacks.
When using the Y-CB-CR jacks, Input 2 will be viewed as a blank PIP sub-picture. (See page 22)
(7) Speaker Matrix Surround Switch
Use this switch to choose between the surround and external speaker features. See Page 17 for Audio
System Setup. The TV's Internal Speakers will be switched off when "EXT" is selected.
(8) Rear Speaker Terminals
These terminals are used to connect external speakers, which are used for the surround sound feature.
The volume level is controlled by the remote control main volume buttons. Use speakers with 8 Ohm
impedance only.
Typical full feature setup. Follow connections that pertain to your personal entertainment system.