Filter
Top Products
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV - 22 -
(5) LAST CHANNEL (LST-CH) Button
Use this button to select between the last two channels viewed. (Good for watching two sporting evens, etc.).
7 VOLUME, MUTE Buttons
Press the VOLUME up (
) or down ( ) button until you obtain the desired sound level.
To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the MUTE button.
Press the MUTE button again to turn the sound off completely (MUTE). To restore the sound, press the MUTE button one
more time, or press the VOLUME up (
) button.
4 CHANNEL SELECTOR Buttons
CHANNEL SELECTOR buttons are used to set Family Favorites, Channel Memory, etc .Enter two or three numbers to
select channels. Enter "0" first for channels 1 to 9 . For channels 100 and above, press the "1" button, wait until another
dash appears next to the channel display on your TV, then enter the remaining two numbers using the number buttons.
Channel selection may also be performed by pressing CH up (
) or down ( ).
NOTE: The TV may not receive some channels if you are not in the correct SIGNAL SOURCE mode. (See page 32.)
(8) EXIT button
When in MENU mode, this button will exit all ON-Screen Displays.
(9) RECALL button
Press this button when no menu is displayed when you want to chaeck the channel being received, the picture source, if
the channel has stereo (ST) or second audio program (SAP), the time, CHANNEL ID, if the Channel Skip (C.C.) function
is activated, if SPECIAL EVENT REMINDER is set, and if the SLEEP timer is set.