Filter
Top Products
REAR PANEL JACKS - 13 -
NOTE:
Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back
picture may be abnormal. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video
cable. If you have a mono VCR, insert the audio cable into the left channel jack of your TV.
REAR PANEL JACKS
Antenna Input/Output
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B.
ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture.
(ANT B cannot be displayed as a sub-picture.) The antenna output labeled "TO CONVERTER" allows the ANT A
connection to pass directly to a different source such as a cable box, when ANT B is displayed as a main picture.
Audio/Video Inputs 1and 2
The INPUT button will step through each video source and antenna source input each time it is pressed. Use the
audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players,
etc. (If you have mono sound, insert the audio cable into the left channel jack).
NOTE: You may use VIDEO, S-VIDEO, or COMPONENT VIDEO: Y-CB-CR inputs to connect to INPUT 2, but
note that only one of these may be used at a time.
Monitor Out
These jacks provide fixed audio and video signals which are used for recording.To have S-VIDEO , S-VIDEO
signal needs to be input to INPUT 1 or INPUT 2, or INPUT 3.
(4) WIRELESS OUT
These jacks provide variable audio output to a set of wireless speakers. They can also be used for another
stereo system amplifier. With this connection, the audio can be controlled by the television's main volume and
also by an independent volume feature found in the THEATER-WIRELESS SOUND menu.
(5) AUDIO TO HI-FI