Filter
Top Products
AUDIO - 61 -
Use ADVANCED SETTINGS to improve the sound performance of your TV depending on listening conditions.
Press THUMB STICK
or to highlight the function. Press THUMB STICK to change the function setting.
When the function has an "X" in the box, it is ON.
MTS MODE
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound)
used when receiving a weak stereo broadcast or SAP (second audio program) which may be a secondary
language, weather report, etc.
The sources received will be displayed at the top center edge of the TV. The source you select will be displayed
above the sources received. See example below for each selection when both stereo and second audio are
received (monaural is always received).
STEREO SELECTED SAP SELECTED MONO SELECTED
INTERNAL SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use only speakers from a
separate stereo system.
AUTO NOISE CANCEL
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will
automatically eliminate the audio for that channel.
LOUDNESS
This function will improve the quality of both low and high frequency sounds when listening at low volume
levels.(Enabling this function will automatically disable the GRAPHIC EQUALIZER. )
PERFECT VOLUME
This function will automatically adjust volume so each channel has the same average volume level. (This function
will automatically be disabled when SURROUND-DOLBY PRO LOGIC or SURROUND DOLBY 3 STEREO are
selected, to ensure correct DOLBY SURROUND sound decoding.) (see page 60)
DYNAMIC BASS
This function allows you to enjoy spectacular bass sound that would normally be heard only with expensive home
speaker systems.