Filter
Top Products
USING THE REMOTE TO CONTROL ADDITIONAL AUDIO/VIDEO
EQUIPMENT - 34 -
(3) EXCLUSIVE TV Buttons
These buttons are for operating the TV.
MY DVD PLAYER CODE IS:___________________
NOTE: Refer to instruction manual of the DVD player for operation of the buttons exclusively for the DVD player.
USING THE REMOTE TO CONTROL ADDITIONAL AUDIO/VIDEO
EQUIPMENT
Operating the precoded function for your Audio/Video component.
This remote is designed to operate different types of AUDIO/VIDEO EQUIPMENT. You must first program the remote to match
the remote system of your AUDIO/VIDEO EQUIPMENT. (refer to page 37.)
1. Turn ON your AUDIO/VIDEO EQUIPMENT.
2. Aim the remote control at the front of your AUDIO/VIDEO EQUIPMENT.
3. Press and release the AV1, AV2 or AV3 button to switch to AUDIO/VIDEO EQUIPMENT pre-coded mode.
4. Hold down the AV1, AV2 or AV3 button on the remote and enter the two digit preset code that matches your AUDIO/VIDEO
EQUIPMENT, as shown on page 34. The indicator light will flash 3 times if the code was accepted.
5. Aim the remote at the Audio/Video component and press the POWER button. The remote will turn off your AUDIO/VIDEO
EQUIPMENT when the correct two digit preset code is entered. When this occurs, the remote control is programmed for your
AUDIO/VIDEO EQUIPMENT. If the AUDIO/VIDEO EQUIPMENT does not turn off, try a different two digit preset code.
6. The remote will now control your AUDIO/VIDEO EQUIPMENT.
7. Repeat steps 1 - 6 it you wish to program the remote to control another audio/video component. Be sure to use a different
A/V button on the remote, since only one component can be programmed per button.