Filter
Top Products
PICTURE-IN-PICTURE (PIP) - 28 -
SURF MODE PIP
This feature will automatically scan all active channel number (those set in memory) and display them as PIP sub-
pictures, along the right edge of the screen. Press the PIP button a second time to remove the sub-pictures form
the screen.
NOTES:
1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory.
2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
3. SURF mode PIP is allowed only when ANT A is selected as the main channel.
4. If PARENTAL CONTROL MOVIE/TV RATINGS setting is ON, PIP SURF mode will be deactivated.
(2) SWAP Button
If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.
NOTES:
1. The SWAP button will only operate when SINGLE PIP mode or SPLIT PIP mode is chosen.
2. The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed
as a sub-picture.
(3) MOVE button
To move the sub-picture to another corner, press the MOVE button. The sub-picture moves one step
counterclockwise every time the MOVE button is pressed. (Example below illustrates the MOVE operation for
initial shipping conditions. If you have customized a PIP position, the MOVE operation may differ slightly from this
example.)