Hitachi 53SDX01B Projection Television User Manual


 
REAR PANEL JACKS
16
REAR PANEL JACKS
Antenna Input/Output
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B.
ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture.
(ANT B cannot be displayed as a sub-picture.) The antenna output labeled "TO CONVERTER" allows the ANT A
connection to pass directly to a different source such as a cable box, when ANT B is displayed as a main picture.
Audio/Video Inputs 1and 2
The INPUT button will step through each video source and antenna source input each time it is pressed. Use the
audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players,
etc. (If you have mono sound, insert the audio cable into the left channel jack).
NOTE: You may use VIDEO, S-VIDEO, or COMPONENT: Y-PB-PR inputs to connect to INPUT 1 and 2, but
note that only one of these may be used at a time.
Monitor Out
These jacks provide fixed audio and video signals which are used for recording.Use the S-VIDEO Output for high
quality video output.
NOTE: S-VIDEO Output may be used for recording, only when the input is of S-VIDEO type.
(4) Audio to Hi-Fi Output
These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the