Hitachi 53SDX01B Projection Television User Manual


 
REAR PANEL JACKS
17
stereo can be controlled by the television's main volume.
(5) SUB WOOFER Output
This jack provides variable audio output to a sub-woofer accessory. With this connection, the audio can be
controlled by the television's main volume. This feature can be turned on and off in the THEATER-SPEAKER
SETUP menu.
(6) REAR SPEAKER Output Terminals
These terminals are used to connect external speaker, which are used for the surround sound feature. The
volume level is controlled by the television's main volume. These speaker output terminals can be turned on and
off in the THEATER-SPEAKER SETUP menu. Use speaker with 8-Ohm impedance only.
(7) S-Video Inputs 1 and 2
Inputs 1 and 2 provide S-Video (Super Video) jacks for connecting equipment with S-VIDEO output capability.
(8) Component: Y-PB-PR Inputs
Inputs 1 and 2 provide Y-PB-PR jacks for connecting equipment with this capability, such as a DVD player or Set
Top Box.
NOTE:
1. DO NOT connect standard VIDEO or S-VIDEO to Input 1 or 2 when using Y-PB-PR input.
2. When using the Y-PB-PR input jacks, connect your components audio output to the TV's Input 1 or 2 Left and
Right Audio input jacks. If your component has a Coaxial Out or Optical Out, use these connectors in place of the
standard Audio L/R output jacks.
3. Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to
the TV's PB input and the components R-Y output to the TV's PR input.
4. Your component outputs may be labeled Y-CB-CR. In this case, connect the components CB output to the
TV's PB input and the components CR output to the TV's PR input.
5. It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PB-PR inputs. (See
pages 58 and 59.)
6. To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PB-PR
jacks.
7. When using the Y-PB-PR jacks, TV will automatically change to SPLIT PIP mode. When you have Picture-in
Picture on and are viewing a Y-PB-PR input, only SPLIT mode is possible. (See page 29)
(9) Coaxial Input
this jack provides high quality audio input from a Dolby Digital DVD player of HDTV Set Top Box. This input can
be used for VIDEO: 1 or VIDEO: 2 audio, as selected in the THEATER-INPUT SOURCE menu. (see page 66)
(10) Optical Input
This jack provides high quality audio input from a Dolby Digital DVD player of HDTV Set Top Box. Use a digital
optical cable to connect y our TV to a compatible device. This input can be used for VIDEO: 1 or VIDEO: 2 audio,
as selected in the THEATER INPUT SOURCE menu. (see page 66)
NOTE:
This TV's optical digital input jack fully complies with the international standard governing this type of jack
(IEC958), and is designed for connection to a Dobly Digital (AC-3 or PCM) DVD Player or Dobly Digital (AC-3 or
PCM) HDTV Set Top Box. Older equipment, some of which is not fully compliant with IEC958, may not be