Hitachi 53SDX01B Projection Television User Manual


 
THEATER
87
Select this mode when viewing a program which is DOLBY PRO LOGIC encoded. (see page 64 for more
information)
DOLBY DIGITAL SURROUND
Select this mode when viewing a program which is DOLBY DIGITAL encoded and you have a digital (optical or
coaxial) input. (see pages 65 and 66 for more information)
NOTES:
1. This TV can not decode or process Digital DTS Surround signals.
2. If you can not adjust SR, SL, or SW, make sure they are turned on in the THEATER - SPEAKER SETUP
menu. (see page 68)
Dolby Pro Logic provides four separate sound channels: front left, center, front right, and surround. For properly
encoded programs marked
the center sound channel contains the dialogue for the program
viewed. The left and right channels produce sound effects that will match the action on the TV screen. For
example, Dolby Pro Logic will enhance the effect of a car viewed driving from the left side of the TV screen to the
right side. The surround channel (speakers) are placed behind the viewing area to additional spatial sound
effects.
To fully benefit from Dolby Pro Logic Surround, it is recommended that the surround speaker system be complete,
as shown on page 23.
Press THUMB STICK
or to change volume level of each speaker independently.
Press SELECT on THUMB STICK when TEST TONE is highlighted and TV will automatically cycle through all
speakers. Simply wait until the speaker you wish to adjust is highlighted (static noise will be heard from this
speaker), then use THUMB STICK
or to adjust VOLUME. Using TEST TONE, you can quickly and easily
set each speaker volume to a desired level.
Press
on THUMB STICK when TEST TONE is highlighted to manually cycle through all speakers.