Hitachi 53SDX01B Projection Television User Manual


 
VIDEO
81
ASPECT RATIO
Adjust this when viewing a COMPONENT: Y-PB-PR input signal.
16:9 - Screen changes to 16:9 aspect ratio. (gray bars visible on top and bottom of screen). HDTV signals are
normally 16:9 aspect ratio.
4:3 - Screen changes to 4:3 aspect ratio. (entire screen is filled with video). SDTV and NTSC signals are
normally 4:3 aspect ratio.
V. POSITION
Adjust this when viewing a COMPONENT: Y-PB-PR signal. This feature is used to center an HDTV video signal
between the top and bottom gray bars. Adjustable range is -10 (video center is toward bottom of screen) to +10
(video center is toward top of screen).
Select AUDIO to adjust the TV to your preference and to improve the sound quality.
Use THUMB STICK
or to highlight the function to be adjusted.
When EQUALIZER is highlighted, press THUMB STICK
to select the frequency you would like to adjust (60,
250, 1K, 3K or 10K).
Then use THUMB STICK
or to adjust selected frequency.
When RESET is highlighted, press down on THUMB STICK to reset EQUALIZER settings to factory conditions.
Press EXIT to quit menu.
NOTE: When DYNAMIC BASS is turned ON, the 60 Hz level signal will automatically be increased.
ADVANCED SETTINGS
Use ADVANCED SETTINGS to improve the sound performance of your TV depending on listening conditions.