Filter
Top Products
19
Hookup and Settings
Display Mode
Selects how to display a wide picture on the screen
when [4:3] is selected in [TV Aspect].
• [Letter Box] Displays a wide picture with bands on the
upper and lower portions of the screen.
• [Pan Scan] Automatically displays a wide picture on
the entire screen and cuts off the portions that do not
fit.
Power Save Mode
You can set up the unit into an economic power save
mode. Nothing is displayed in the display window when
the unit is turned off.
• [OFF] Power Save Mode is not active.
• [ON] Power Save Mode is active.
Initialization (HDD Format)
You can reset the recorder to its original factory
settings and initialize the HDD or Memory Card.
• [Factory Set] If you need to, you can reset the
recorder to all its factory settings. Some options
cannot be reset. (Rating, Password, and Area Code)
• [HDD format] Initializes the HDD (Hard Disk Drive):
everything recorded on the HDD will be erased.
• [M/C format] Initializes the M/C (Memory Card):
everything recorded on the Memory Card will be
erased.
1. Select [Initialize] option then press X.
2. Press S / T to select the desired option then press
ENTER.
The confirm message will appear.
3. Use W / X to select [Yes] or [No] then press
ENTER.
Language Settings
Display Menu
Select a language for the Setup menu and on-screen
display.
Disc Menu/Audio/Subtitle
• [Original] Refers to the original language in which the
disc was recorded.
• [Other] To select another language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list in
the reference chapter (see page 58). If you enter the
wrong language code, press CLEAR.
• [Off] (for Disc Subtitle): Turn off Subtitle.
Audio Settings
Each DVD disc has a variety of audio output options.
Set the recorder’s Audio Output according to the type of
audio system you use.
01EN01DVDS253A(AU).book Page 19 Wednesday, June 7, 2006 3:39 PM