Filter
Top Products
20
Program Edit
You can edit a channel manually (add, delete, name,
move, etc.).
1. Select [Program Edit] option then press B.
2. Press ENTER while [Edit] is selected.
The Program List menu appears.
3. Use v / V to select a PR number then press
ENTER.
4. Use v / V to select the program option then press
ENTER.
• [Program Edit] Sets the channel manually. See
“Program Edit” on the right.
• [Station Rename] Changes the station name.
The display for entering characters appears.
To enter characters, see page 58.
•[Move] Sorts the programme positions on the
Program List. Press v / V to move the selected
programme position to a new location.
• [Delete] Disables a programme position you do
not need.
• [Decoder On/Off] Sets the channels for the
decoder.You need this setting to watch or record
PAY-TV/Canal Plus programmes.
Press ENTER so [Decoder] appears on the dis-
play. Press ENTER again to turn off the setting.
• [NICAM Auto/off] Sets the channels for the
NICAM broadcast. Normally, [NICAM] is lit on the
display. If the sound from NICAM broadcast is
not clear, press ENTER so [NICAM] disappears.
5. Press RETURN (O) repeatedly to exit Program
List menu.
Program Edit
You can perform a search to select and store TV chan-
nels manually.
When you select [Program Edit] in step 4 above, the
display for setting channels appears.
1. Use b / B to select the item and press v / V to
change the setting.
• [PR] indicates the selected programme position.
• [Seek] Searches for a channel automatically.
Searching stops when the recorder tunes in a
channel.
• [Ch.] Changes the channel number.
• [MFT] Fine tunes the channel to obtain a clearer
picture.
2. Choose OK then press ENTER to confirm the set-
ting and returns to the Program List menu.
AV1 Decoder
Sets the EURO AV1 AUDIO/VIDEO jack for inputting
encoded video signals.
1. Press INPUT while the Program List menu
appears.
2. Press ENTER to select [On] or [Off]
• Off: Inputs the signals from the EURO AV1
AUDIO/VIDEO jack. Normally select this.
• On:The encoded video signal input from the
EURO AV1 AUDIO/VIDEO jack is output to the
EURO AV2 DECODER jack for decoding.
The decoded signal is then input back through
the EURO AV2 DECODER jack so you can
record or view PAY-TV/Canal Plus programmes.
In this case, select [AV1] by pressing INPUT but-
ton.