Filter
Top Products
3
Important for United Kingdom
The mains lead on this equipment is supplied with a
moulded plug incorporating a fuse, the value of which
is indicated on the pin face of the plug. Should the
fuse need to be replaced, an ASTA or BSI approved
BS1362 fuse must be used of the same rating.
If the fuse cover is detachable never use the plug with
the cover omitted.
If a replacement fuse cover is required, ensure it is of
the same colour as that visible on the pin face of the
plug. Fuse covers are available from your dealer.
DO NOT cut off the mains plug from this equipment. If
the plug fitted is not suitable for the power points in
your home or the cable is too short to reach a power
point, then obtain an appropriate safety approved
extension lead or consult your dealer. If there is no
alternative to cutting off the mains plug, ensure that
you dispose of it immediately, having first removed the
fuse to avoid a possible shock hazard by inadvertent
connection to the mains supply.
IMPORTANT
The wires in the mains lead are coloured in accor-
dance with the following code:
Blue = Neutral, Brown = Live
As these colours may not correspond with the
coloured marking identifying the terminals in your
plug, proceed as follows:
The wire coloured BLUE must be connected to the
terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connect-
ed to the terminal marked with the letter L or coloured
BROWN or RED.
On no account connect either of these wires to the
terminal marked E or by the earth symbol or
coloured green or green and yellow.
CAUTIONS
This product satisfies CE regulations when shielded
cables and connectors are used to connect the unit
to other equipment. To prevent electromagnetic inter-
ference with electric appliances, such as radios
and televisions, use shielded cables and connectors
for connections.
English