Filter
Top Products
49
Recording
VIDEO Plus+
®
System
This system makes programming timer recordings
very simple. Most TV guides publish VIDEO Plus+ pro-
gramming numbers with their program details. If you
want to make a timer recording of a program, you just
input the corresponding VIDEO Plus+ programming
number.The date, start, stop and channel settings are
made automatically. All you have to do is tell the
recorder the recording mode, and whether it’s a once-
only recording, or a regular recording.
Up to 16 timer programs can be stored in the
recorder.
1. Press VIDEO Plus+.
The VIDEO Plus+ menu will appear.
Press VIDEO Plus+ again to exit the menu.
• [Number] Enter the VIDEO Plus+ programming
number.
• [Repeat] Choose a desired repeat (Once,
Daily (Monday - Friday), or Weekly).
2. Use the number buttons then press ENTER to
enter the VIDEO Plus+ programming number.
To check the programming, the Timer Record
menu will appear.
• b / B (left/right) – move the cursor left/right
• If you make a mistake before pressing ENTER,
press CLEAR repeatedly to delete password
numbers one by one then correct it.
3. Use b / B to move the cursor to the Repeat
column then use v / V to select [Repeat] option
(Once, Daily (Monday - Friday), or Weekly).
4. Press ENTER after filling in all the program infor-
mation.
The program will be memorized by the recorder.
5. You can change the information as required using
b / B / v / V (Media, PDC, etc.)
Refer to “Timer Recording” on previous page.
6. Choose a record mode (XP, SP, LP, or EP).
7. Press ENTER, the program will be memorized by
the recorder.
To check the programming, the Timer Record List
will appear.
Check field’s “Rec. OK” on the Timer Record List
indicates that the timer recording is programmed
correctly.
8. Press RETURN (O) to exit the Timer Record
menu.
9. Make sure that you load a recordable disc for DVD
recording and press POWER to switch your unit to
Standby.
For HDD recording, also press POWER to set the
recorder to the standby status.