Filter
Top Products
PLAYBACK
37
PLAYBACK
NORMAL PLAYBACK
• Be sure to check that the POWER and the VCR/TV indicators are both on.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the
back of the VCR to match the channel selected on the TV.
(Back of the VCR)
1 Insert a prerecorded tape
Counter mode appears at counter 0:00:00 on the TV screen. If the erase-protection tab
has been removed, the VCR will start playback automatically.
2 To begin playback
Press PLAY button.
PLAY
NOTE: If any menu is activated on the TV screen, the PLAY button on the remote
control does not function. Press the RESET/EXIT button to clear the menu. Then, press
the PLAY button.
If a tape is already in the VCR with power off
2A) Using button on the VCR
Just press the PLAY button on the VCR. Power will automatically turn on and playback
will start. (Direct Button Operation)
2B) Using button on the remote control
Press POWER button to turn on the VCR, and then press the PLAY button on the
remote control.
3 To stop playback
Press the STOP button.
PICTURE SEARCH