Hitachi VT-MX4410A VCR User Manual


 
SPECIAL PLAYBACK
42
• The COUNTER MEMORY button does not function if the Auto Repeat mode is set to
[ON]. In this case, set the Auto Repeat mode to [OFF].
• To stop playback, press the STOP button.
TO EXIT THE AUTO REPEAT MODE
Repeat steps [1] to [2]. Then, press the F.FWD/ button. [ON] will then disappear from
the menu. Then, press the RESET/EXIT button to return to TV mode.
Power failure: If there is a power failure for more than 30 seconds, Auto Repeat
Playback will go to off.
RENTAL PLAYBACK
This function enables you to improve the picture quality when playing back worn
cassettes such as rented tapes
.• Selecting ON or OFF must be done during playback.
1 Insert rental tape into VCR
Begin playback.
2 Select "VCR SET UP"
Press the MENU button until the VCR SET UP menu appears.
3 Select "RENTAL"
Press PLAY/ or STOP/ button to point to "RENTAL".
VCR SET UP
AUTO REPEAT
 RENTAL
AUTO RETURN