Filter
Top Products
RECORDING
49
SP
NOTE: If any menu is activated on the TV screen, the REC button on the remote control
does not function. Press the RESET/EXIT button to clear the menu. Then, press the
REC button.
4 Stop recording
Press STOP button when recording is completed.
SKIPPING UNWANTED SCENES DURING RECORDING
Press the PAUSE button on the remote control to temporarily stop recording.
Press PAUSE or REC button to resume recording.
Press the PAUSE or REC button to resume recording.
PAUSE
NOTE: When the VCR is in the Pause mode, you may view the pause time remaining
with "" marks on the TV screen. Each "" mark represents one minute. After five
minutes, the VCR will automatically switch to the Stop mode to prevent tape damage.
When there is 1 minute remaining, one "" will flash.
RECORDING ONE PROGRAM AND VIEWING ANOTHER
You can record one program while viewing another. To start recording, follow steps [1]
to [3] under "VIEWING AND RECORDING THE SAME PROGRAM".