Filter
Top Products
Getting Started (controls)
Study these pictures carefully to learn about the buttons and controls that
you'll need for everyday operation. Various controls are explained
throughout this manual as they are needed, but now is a good time to get
familiar with their locations.
Most of the time, you'll be directing the VCR from the remote control, but
there are some controls on the VCR that will come in handy too.
When you're familiar with these basic controls, proceed to Initial Setup
(page 20). We'll show you how to program your local channels and set
the clock to make your VCR fully functional.
How the Remote Control Works
Pressing a button on the remote control transmits an invisible beam of
light (infrared) to a receiver at the right front of the VCR.
When using the remote, aim the front end toward the VCR and make sure
nothing - such as a coffee table or your dog - is blocking the path of the
infrared beam.
About the Illuminated Buttons
Try pressing the remote control's white buttons one at a time. As you
press, one of the three device buttons lights up - VCR1, TV or VCR2. This
helps you keep track of which device you are controlling at the moment.
Remote Control Illustration
Remote Control Buttons
POWER Turns the VCR on and off.
GUIDE Brings up an on-screen setup and programming guide, the Easy
Guide System.
VCR/TV Switches between viewing through the VCR and not viewing
through the VCR.