Filter
Top Products
Basic operations (VCR Plus + Recording)
5. Turn on your cable box and tune it to channel 02.
6. Enter the output channel of your cable box by pressing a number on the
remote. For example, press 0 3 for channel 3.
7. Press GUIDE to enter the output channel of your cable box. You will
then see this screen.
8. Press GUIDE to display the CABLE BOX TYPE message on the TV
screen.
9. Enter your cable box type from the chart below by pressing two
numbers.
10. Press GUIDE to enter your cable box type. The VCR will change the
cable box from channel 02 to channel 09 when you enter the correct code
for your cable box.
11. Cable box tuned to channel 9: Press number 2 on the remote. Your
cable box and VCR are now set for VCR Plus+ program recording. In most
cases, you cam use the remote's channel up / down control to change the
channels on your cable box. (The VCR channel will not change, but cable
box will change channels.) Depending on the manufacturer of your cable
box, certain models will allow you to enter the channel directly by using
the numbers on the remote.
Cable box did not tune to channel 9: Press number 1 on the remote and
enter a different code from the chart.
If these codes do not work:
Try repositioning the cable box on top of the VCR and reentering