Filter
Top Products
Basic Operations (VCR Plus + Recording)
the codes.
Try entering all code numbers (00 - 52). Press CLEAR on remote to
change incorrect entries.
If none of the codes work, press GUIDE several times to quit. The
VCR will not control your cable box. However, the output channel of
the cable box has been set. Turn on the cable box and leave it tuned
to the channel you want to record some time before the recording is
to begin.
Using VCR Plus+ to Record a Program
Now that your channels are set up, you can take advantage of this quick
and easy method of delayed recording. You will use the on-screen Easy
Guide System, following the basic procedure for delayed recording
outlined on page 37. See the section on Recording a Program for
recording tips and programming priorities.
You set up the delayed recording using the on-screen Easy Guide
System.
1. Press GUIDE, then press 1 to select VCR PLUS RECORDING and
bring up this screen:
2. Use the number buttons to enter the PlusCode of the program you want
to record. This code can be up to eight digits. If you enter a wrong digit,
press CLEAR and enter the correct one.
3. If you accidentally enter a nonexistent PlusCode, the VCR gives you an
error message that disappears from the screen in about 10 seconds.
4. If you have entered the correct PlusCode, press GUIDE to store the
PlusCode in the VCR's memory. This brings up another screen: