Filter
Top Products
Basic Operations
This VCR's indexing system is based on the VHS Index Search System
(VISS). The new system may not recognize index marks on tapes
recorded on older VCRs.
If the VCR is in PLAY mode, press STOP.
Press DISPLAY. This brings up the Set Go-To Time/Index Screen.
Press 7 for rewind or 9 for forward to begin the index search.
The tape rewinds or fast-forwards until an index mark is detected. During
this search, the words SCAN AND PLAY display on the bottom of your
screen.
When the VCR finds an index mark, it plays 15 seconds of the program
that begins at that spot.
If this is the program you were looking for, press PLAY to resume
normal playback.
If this is not the program you want, don't press anything. After 15
seconds, the VCR will move to the next mark and play a part of that
program. The VCR will continue searching until you press STOP or reach
the end of the tape.
When you find the program you want and press PLAY, the VCR returns to
PLAY mode.
To stop the index search before an index mark is reached, press STOP.
If there are no index marks on the tape, the VCR will just rewind to the
beginning or fast forward to the end.