i lMPORTANTSAFEGUARDS
In addition to the careful attention devoted to quality standards in the
manufacture of your video product, safety is a major factor in the design of
every instrument. But, safety is your responsibility too.
This page lists important information that will help to assure your
enjoyment and proper use of a Video Cassette Recorder and accessory
equipment. Please read it carefully before operating your video product
and keep it in a handy place for future reference.
INSTALLATION
1 Read and Follow Instructions -- All the safety and operating
instructions should be read before the video product is operated. Follow
all operating and use instructions.
'it_ Ei
2 Retain Instruction -- The safety and operating instructions should be
retained for future reference.
3 Heed Warnings -- Comply with all warnings on the video product and in
the operating instructions.
4 Polarized Plug -- This video product is equipped with a polarized
alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. To prevent electric shock do not use this
polarized plug with an extension cord, receptacle or other outlet unless the
blades can be fully inserted without blade exposure. If you need an
extension, use a polarized cord.
5 Power Sources -- This video product should be operated only from the
type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your video dealer or local
power company. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
6 Overloading -- Do not overload wall outlets and extension cords as this
can result in a risk of fire or electric shock. Overloaded AC outlets and
extension cords are dangerous, and so are frayed power cords, damaged
or cracked wire insulation and broken plugs. They may result in shock or
fire hazard. Periodically examine the cord and have it replaced by your
service technician if appearance indicates damage or deteriorated
insulation.