Filter
Top Products
GB48
User’s Manual
6. Edit Channels
6.4 Automatic Channel Numbering
You can set whether or not the channels are numbered automatically by broadcaster.
1. Press the MENU button.
2. Select Edit Channels using the
/ button and press the OK or button.
3. Select Automatic Channel Numbering using the
/ button and press the OK or button to select
Enable/Disable.
Note:
• When changing from Enable to Disable or vice versa, the terrestrial channels will be searched again
and the product will reboot automatically.
• When Automatic Channel Numbering is set to Disable, Edit Terrestrial Channel Lists menu and Edit
Satellite Channel Lists menu turn into a single menu; Edit Channel Lists.
6.5 Renew Channel Numbers
You can renew the channel numbers you edit.
1. Press the MENU button.
2. Select Edit Channels using the
/ button and press the OK or button.
3. Select Renew Channel Numbers using the / button and press the OK or button.
4. Select OK and press the OK button to renew the channel number you edit.
6.6 Impor t/Export Channels
You can transfer and edit the channel data and menu by connecting the PC to the receiver.
1. Download the Uniformula programme for this product into
your computer (http://www.humaxdigital.com) and install
the Uniformula.
2. Connect your product and PC using the RS-232C cable.
3. Press the MENU button.
4. Select Edit Channels using the
/ button and press the
OK or
button.
5. Select Import/Export Channels using the / button and
press the OK or
button.
6. Select Download Channels from PC/Upload Channels to
PC using the / button and press the OK or button.
Note: For more information about how to use the Uniformula, refer to the Help>Contents menu in the
Uniformula.