Humax COMBO-9000 TV Receiver User Manual


 
7. Installation
GB59
User’s Manual
Note:
It may take 5~10 minutes to update software.
Other functions will not activate while software update takes place.
You cannot schedule programmes during software update.
2. Automatic Update
You can set the product to  nd HUMAX software update site and update software automatically.
1. Select Automatic Update using the
/ button and press the OK or button.
2. Automatically search for new software. Select Cancel and press the OK button to  nish search.
3. When detecting software update, the following result is displayed. If new software is not found by
automatic update, use manual update.
4. Select Ye s and press the OK button to start updating. Select No and press the OK button to return to
the previous menu without updating.
5. When completing the software update, the product is automatically powered o and on again.
3. Manual Update
You can perform manual update using know MUX information.
1. Select Manual Update using the
/ button and press the OK or button.
2. Select Channel using the / button and press the OK or button. Select the channel number using
the / button and press the OK or button.
3. Select Frequency using the / button and press the OK or button. Enter the frequency using the
NUMERIC(0-9) buttons.
4. Select Search and press the OK button to search software. Existing new software will show. If new
software does not exist, press the OK button to return to the manual update menu.
5. Select Ye s and press the OK button to start updating. Select No and press the OK button to return to
the previous menu. Performs software update. Please wait until it is completed.
6. When completing the software update, the product is automatically powered o and on again.