Filter
Top Products
11
Connection
Connecting VHF and UHF Antennas
Connecting an Outdoor Antenna
For the best reception, we recommend you use an outdoor antenna. Severely
weathered antennas and antenna cables can reduce the signal quality. Before making
any connections, inspect all antenna hardware; any service center can explain the
various outdoor antennas available to you.
300-Ohm Flat wire
1. Connect the 300-ohm flat wire to the screws on the 300-ohm adapter.
2. Push the end of 300- to 75-ohm adapter into the 75-ohm antenna jack.
75-Ohm Coaxial cable
1. Connect the 75-ohm coaxial cable directly to the 75-ohm antenna jack.
Connecting a CATV Cable
If you subscribe to a CATV system, make the antenna connection as described below.
1. Remove the 300-ohm to 75-ohm adapter or the cable from the TV, if attached.
2. Connect the CATV cable (75-ohm coaxial cable) to the antenna jack.