ILY Enterprise 3 DVD Recorder User Manual


 
Copyright©2005 ILY Enterprise, Inc. All rights reserved.
4
Chapter 1 Introduction
1.1 Overview
People who want to create multiple copies of their DVDs or CDs usually take a long time to do so.
They might not have enough DVD+RW drives or they might be using their computers for some
other important tasks. The duplication process noticeably slows down a computer during the
burn process. Rather than sit at the computer for hours duplicating discs one at a time, it is much
more efficient to use a CoolCopyD DVD/CD duplication system.
The CoolCopyD DVD Duplicator system is a standalone duplicator and does not need to be
connected to a computer. It can duplicate discs accurately and quickly. With its multi-function
LCD panel, CoolCopyD DVD Duplicator is easy for any user to operate. It is a cost-efficient DVD-
R duplicator for audio, data, and video applications. The simple control panel is designed to
provide copy mode selection and copy operation.
1.2 Features
Standalone IDE to IDE DVD Copy controller
2(CoolCopyD1AL(DVD-Backup)) / 4(CoolCopyD3) / 8(CoolCopyD7) /
16(CoolCopyD14)
independent IDE channel
Self system diagnostics when power on
Supports Hard Drive image
Auto format detection
User friendly interface with message rich LCD display
Fast copies supports high speed DVD-RW writing mode
Easy operation without software and training are required
Firmware upgrade via DVD-ROM
1.3 Specification
Power requirement – voltage: 5VB+/- 5%
Current: 0.5A Max.
Environment - Temperature
Operating 0˚ C to 70˚ C
Storage -20˚ C to 85˚ C
Humidity - 15% to 90%
Models: CoolCopyD3/CoolCopyD7
Dimensions - Length: 200 mm
Width: 146.2 mm
Height: 42 mm
Connectors - 40-pin internal IDE connector
Cable (Optional) - Using ATA-66 (*Cable of length do not use longer than 46cm)
DVD Format - DVD-ROM (Mode1 & Mode2), DVD-ROM/XA (Mode2 form1 & form2),
DVD-DA,
Mixed-Mode, Video DVD, DVD-I, Karaoke CD, Photo CD (Single & Multi-
session), CD-Extra, HFS, CD Bridge, ISO9660, CD-R, and DVD+RW