Ingersoll-Rand ETA2 TV Converter Box User Manual


 
16
Printing of stored readings from measure mode
Pressing from the measure mode will result in all stored readings being printed to an
attached printer or computer.
Note: Transducer needs to be connected to ETA.
Measure Mode Circle-Store Option
Circle-Store is a function to increase the number of stored readings to extend beyond the nor-
mal maximum of 200 readings possible in measure mode. With the circle-store option selected,
readings will be accepted beyond the 200 limit but the first readings taken will be lost. Effectively
the last 200 readings taken will be stored but the user is not limited to taking only 200 readings.
To select this option:
From main menu
Press then press (Misc’)
Press then press (Software Reset)
Press the 6 times to access the Circle-store menu
Select option 2 ‘Circle-store On’ using ; press
Press Screen will prompt: “End of setup”
Press to return to main menu
P
6
6
Enter
MENU
MENU MENU
7529_eng.fm Page 16 Wednesday, November 12, 2003 8:57 AM