Ingersoll-Rand ETA2 TV Converter Box User Manual


 
43
To Perform Software Reset
CAUTION: Use of this function will result in the loss of all stored data. Following this
procedure will return the ETA to its factory default state. This feature should
only be used when it is desired to clear all settings from the ETA.
From main menu:
Press then press (Misc)
Press then press (S/W Reset)
Press the key 8 times to access the Software Reset screen
Screen will display “Erase all data and set mode?”
To carry out S/W reset, press
To exit without performing S/W reset, press
Screen will display “ERASING ALL CHARACTERISTICS ROUNDS AND MASTER ROUNDS”
- wait a moment for display to change
Select Subgroup mode using and press screen will display “End of setup”
To return to main menu, press
There are a number of other parameters which are set from the Software Reset Menu, some of
which are detailed elsewhere in this manual.
Pressing after making a selection will take the user on to the next screen.
Pressing will give the user the option to exit to the Misc menu by pressing or
continuing to edit by pressing .
Screens can be skipped using the and keys.
6
6
Enter
MENU
Enter
MENU MENU
Enter
MENU MENU
7529_eng.fm Page 43 Wednesday, November 12, 2003 8:57 AM