Filter
Top Products
38
NS-19E450A11/NS-19E450WA11/NS-22E450A11/NS-22E455C11 Insignia 19"/22" LED-LCD HD TV
www.insigniaproducts.com
Remote control
General
Specifications
Design specifications are subject to change without
notice. Dimensions and weight specifications are
approximate.
Good picture, but no sound.
• Increase the volume.
• Press MUTE to make sure that the sound is not
turned off.
• Make sure that the audio mode is set to STEREO
or MONO. For more information, see “Selecting
the audio mode” on page 19.
• Make sure that headphones are not connected to
your TV. When headphones are connected,
sound from the TV speakers is muted.
Audio noise or static.
• Move radio frequency equipment, such as cell
phones, away from your TV.
Problem Solution
Remote control does not
work.
• Make sure that the remote control batteries are
installed correctly. For more information, see
“Installing remote control batteries” on page 7.
• Replace the remote control batteries. For more
information, see “Installing remote control
batteries” on page 7.
• Make sure that the power cord is plugged into a
working power outlet.
Remote control does not
control connected HDMI
devices.
• Make sure that the INlink Control option is set to
On. See “Using INlink” on page 31.
• Make sure that the HDMI CEC control is turned on
for the connected device.
• Make sure that the connected HDMI device is
CEC-compatible.
Problem Solution
Cannot turn to one or more
channels.
• The program may be blocked by parental
controls. For more information, see “Blocking
unrated TV” on page 24 or “Setting parental
control levels” on page 25.
• The control buttons on the front of your TV may
be locked. For more information, see “Locking
control buttons” on page 23.
• The channel may have been deleted from the
channel list. You can still tune to the channel
using the number buttons. For more
information, see “Selecting a channel” on
page 16. You can also add the channel to the
channel list. For more information, see “Hiding
channels” on page 20.
Password is lost.
•On the Parental Controls menu, enter 9999 as
the password, then set a new password. For
more information, see “Setting or changing the
password” on page 23.
Cannot access some settings
or options.
• If a setting or option is grayed out, it is not
available in the current mode.
TV cabinet creaks.
• When you are using your TV, the temperature
inside the cabinet increases. This causes the
cabinet to creak. This is not a malfunction.
Buttons do not work.
• Unplug the power cord, wait a few seconds, then
plug the power cord back in and turn on your TV.
Button labels are not lit on the
front of the TV.
If your TV is turned on and the button labels on the front
of your TV are not lit, press any button except to light
the button labels. Then press the button you want. Button
presses must be within 10 seconds of each other.
Problem Solution
TV type LCD
TV panel 19-inch TFT LCD
22-inch TFT LCD
Channels VFH: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1 - 135
DTV: 2 - 69
Audio multiplex BTSC system
Audio output 3W × 2
Power requirement AC 120 V, 60 Hz
Power consumption
25 W (19")
30 W (22")
Dimensions 19-inch
18.1 × 13.1 × 5.51 inches (460 × 333 × 140 mm)
22-inch
20.83 × 14.65 × 5.51 inches (529 × 372×140 mm)
Weight 19-inch
7.1lbs. (3.2kg)
22-inch
8.38 lbs. (3.8 kg)
Input terminals HDMI (3)
Component video with L/R audio (1)
Composite video with L/R audio (1)
VGA with audio (1)
Antenna (1)
USB (1)
Output terminals Headphone jack (1)
Digital audio (1)