Filter
Top Products
10
NS-24L240A13 Insignia 24" LCD TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 2/DVI jack on the back of your TV.
5 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the back of your
TV and to the AUDIO OUT jacks on the cable or
satellite TV box.
6 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
7 Go through the Setup Wizard on page 19
.
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
B, and PR
video jacks on the back of your TV and the
component video out jacks on the cable or
satellite box.
4 Connect an audio cable (not provided) to the
AV IN L/R AUDIO jacks on the back of your TV
and to the audio out jacks on the cable or
satellite TV box.
5 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
6 Go through the Setup Wizard on page 19
.
Note
You must use the HDMI 2/DVI jack to connect a
cable or satellite box using DVI. If you use the HDMI 1
jack, you will not hear sound.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
USB HDMI 1 HDMI 2 / DVI VGA
PC / DVI
AUDIO IN
DIGITAL
OUTPUT
Y
C
O
Cable or satellite box
HDMI cable with
HDMI-DVI adapter
3.5mm audio cable
Back of TV
Note
•The COMPONENT IN video jacks share the
AV IN L/R AUDIO jacks with the AV IN VIDEO
jack.
• When you connect the audio using the
AV IN L/R AUDIO audio jacks, the audio output
is analog.
PC / DVI
AUDIO IN
DIGITAL
OUTPUT
YP
B
P
R
VIDEO
COMPONENT IN AV IN
L -AUDIO - R
AN
T
Audio cable
Cable or satellite box
Cables are often
color-coded to match
color-coded jacks.
Component video cable
Back of TV