Filter
Top Products
15
Insignia NS-F14TV 14" Flat Panel TV
www.insignia-products.com
Setting up your TV
Connecting cable TV or a VHF/UHF external antenna
To connect cable TV or a VHF/UHF external antenna:
1 Connect a 75 Ohm cable to the antenna jack on the back of your
TV.
2 Connect the other end of the 75 Ohm cable to a cable TV or an
external VHF/UHF TV antenna.
Caution
Do not bind the antenna cable and the power cord together.
Note
If you use a 300 flat feeder, you need to connect a 300/75
Ohm converter to the 300 flat feeder, then connect the
converter to your TV antenna jack. We recommend using a
75 Ohm cable to reduce interference caused by radio
waves.