Filter
Top Products
23
Insignia NS-F14TV 14" Flat Panel TV
www.insignia-products.com
SOUND VOLUME–Increases and decreases the
volume.
TREBLE–Adjusts the treble.
BASS–Adjusts the bass.
BALANCE–Adjusts the balance between the
right and left speaker jacks.
SURROUND–Turns surround sound on or off.
STEREO–Selects the sound type. You can
select NORMAL, ENHANCED, or MONO.
TUNING CHANNEL–Selects the TV channel. Press
the channel buttons on the remote control or
TV or use the number buttons to enter the
channel number.
DELETE CH–Determines whether the current
channel is stored in the channel list. If you
select YES, the channel is skipped when you
press the channel buttons. If you select NO,
the channel is not skipped when you press the
channel buttons.
LABEL–Lets you add a five-character
description to a channel number. For more
information, see “Adding a channel label” on
page 19.
SOURCE–Selects the source of the TV
signal. Select AIR for a VHF/UHF antenna.
Select CABLE for a cable TV connection.
AUDIO–Selects the audio channel. You can
select MAIN, SUB1, SUB2, or SUB3. (This
option only works in DIGITAL mode.)
AUTO SEARCH–Scans the channels for
available signals, then creates and stores a
channel list. If you are using a VHF/UHF
antenna, make sure that you select AIR in the
SOURCE option. If you are using cable TV,
make sure that you select CABLE in the
SOURCE option.
Notes: Press the MENU button to stop
scanning. If you are in DIGITAL mode and
press the MENU button to stop scanning, the
channels found during the scan are not
stored.
After scanning for channels in DIGITAL mode:
• If a scrambled channel is displayed, a
password is required to see the channel.
• If NO VIDEO appears, the channel is an
audio channel only.
• If NO SIGNAL appears, there is no
signal for the channel.
Menu Option