Filter
Top Products
48
www.insigniaproducts.com
Specifications
Design and specifications are subject to change
without notice.
Remote control does not work • Press TV (not the color button)
• Replace the batteries. Make sure
that the + and – symbols on the
batteries align with the + and –
symbols in the battery
compartment.
• Clean the remote sensor on the
front of your TV.
• Bright or fluorescent lighting may
interfere with the remote control
signal. Turn off the light or move
your TV.
Snowy picture or noise • Make sure that the A/V and
antenna cables are connected
correctly and securely.
VGA picture is not stable or
synchronized
• Make sure that you have selected
the correct VGA mode on your
computer.
No output from one of the speakers • Adjust the balance in the Audio
menu.
Control buttons do not work • Make sure that the Button Lock
option is set to Off. For more
information, see “Locking control
buttons” on page 26.
• Unplug the power cord, wait a few
seconds, then plug the cord back in
and turn on your TV.
After images appear • Do not display a still image, such as
a logo, game, or computer image,
for an extended period of time. This
can cause a permanent after-image
to be burned into the screen. This
type of damage is not covered by
your warranty.
Picture has a few bright or dark dots • A few bright or dark dots on an LCD
screen is normal. It does not affect
the operation of this TV.
Problem Solution
Analog standard NTSC
Digital standard ATSC, 8-VSB, Clear-QAM
Screen 32"
Channel coverage VHF: 2-13
UHF: 14-69
CATV: Mid band - A-8 ~ A-1, A ~ I
Super band - J ~ W
Hyper band - AA ~ ZZ, AAA, BBB
Ultra band - 65 ~ 94, 100 ~ 135
Power source AC 120 V ~ 60 Hz
Power consumption 150 W
<1 W in standby mode
Audio power 10 W + 10 W internal speaker
S-Video input (2) Y: 1 V (p-p), 75 ohm, negative sync
C: 0.286 V (p-p) (burst signal), 75 ohm
Video/audio input (2) Video: 1 V (p-p), 75 ohm, negative sync
Audio: 300 mV (rms)
Component input (2) Y: 1 V (p-p), 75 ohm, including sync
Pr/Cr: ±0.35 V (p-p), 75 ohm
Pb/Cb: ±0.35 V (p-p), 75 ohm
Audio: 300 mV (rms)
Suggested resolutions: 1080p, 1080i, 720p, 480p,
480i
HDMI input (4) 4 HDMI input jacks
HDCP compliant
E-EDID compliant
Suggested scan rates: 1080p, 1080i, 720p, 480p,
480i
VGA input E-EDID compliant
Suggested scan rates: 640x480/60 Hz,
800x600/60 Hz, 1024x768/60 Hz,
1920x1080/60 Hz
Audio input: Headphone mini-jack for stereo
Accessories Remote control and batteries (2 AA)
Remote control holder
AC power cord
Component cable
Cleaning cloth
User guide
Quick Setup Guide