HMP Linux 1.2 Release Update, Rev 05 — September 2006September 2006 42
3.5 Demonstration Software Documentation
This section contains updates to the following documents:
• Audio Conferencing API for Host Media Processing Demo Guide
• Continuous Speech Processing API for Host Media Processing Demo Guide
• IP Media Server for Host Media Processing Demo Guide
• Global Call API Demo Guide
3.5.1 Audio Conferencing API for Host Media Processing Demo
Guide
The Audio Conferencing API for HMP Demo is designed to run using a series of four or
fewer contiguous channels. The highest channel number in the series must be 120 or
lower. Attempts to run the demo using a channel number higher than 120 will cause the
demo to fail.
(IPY00009701 = PTR 34019)
In Section 1.1, “Overview” of Chapter 1, “Demo Description”, for Linux, the Audio
Conferencing API for HMP Demo is located in:
$(INTEL_DIALOGIC_DIR)/demos/Conferencing/ConferencingDemo/Release/
In Section 1.2, “Features” of Chapter 1, “Demo Description”, the following Call Control
feature is not demonstrated by the demo:
• RAS (Gatekeeper) support via the Global Call API
(IPY00009238 = PTR 33768)
In Section 2.1,”Hardware Requirements” of Chapter 2, “System Requirements”, the
first bullet in the Requirements for Linux should read:
• Machine using the Red Hat Enterprise Linux Advanced Server 3.0, Update 1
operating system with kernel version 2.6.8.1.
In Section 4.1,”Starting the Demo” of Chapter 4, “Running the Demo”, the following
changes apply:
• In Step 1, for Linux, the demo is started by executing the following command:
./
ConferencingDemo
• Step 2 of the procedure should read: “Make an IP call into the system using two IP
endpoints”.